User Tools

Site Tools


products:wizwiki_mbed_kit:kit_en

WIZwiki-W7500 mbed Starter Kit

Introduction

This document provides information and examples for the utilization WIZwiki-W7500 mbed Starter Kit products. Include the following:

  • Product Feature
  • Kit Includes
  • Tutorials
  • Related documents

 mbed Starter Kit all parts

The WIZwiki-W7500 mbed Starter Kit is a product that you can learn how to take advantage of WIZwiki-W7500 platform board.

This Kit includes the WIZwiki-W7500 board, USB cable, LAN cable, breadboards, jumper wires, sensors, buttons, LEDs and resistors for users to implement the hardware DIY.

Using a variety of libraries and sample code posted on the ARM mbed, any novice user can easily implement one’s own application.

Product Feature

This starter kit is suitable for beginners who want to make IoT device

Because WIZwiki-W7500 platform board has been mbed-enabled, user can use free on-line compiler and various examples in mbed.org site.

This kit includes a USB cable, a LAN cable, two breadboards, jumper wires, sensors, buttons, LEDs and resistors.

Kit Includes

           Part Name                         Description                       Q.Ty
      WIZwiki-W7500        ARM Cortex-M0 Test Board                              1
      USB cable            USB Mini-B, 1meter                                    1
      LAN cable            CAT5, 1meter                                          1
      Breadboard           55 x 85 mm                                            2
      Resistor (330 Ohm)   1/4W J(5%) 330 Ohm                                    20
      Resistor (10K Ohm)   1/4W J(5%) 10K Ohm                                    20
      Pushbutton Switch    Momentary Pushbutton Switch                           4
      LED (Red)            5pi DIP type Red LED                                  5
      LED (Green)          5pi DIP type Green LED                                5
      LED (Yellow)         5pi DIP type Yellow LED                               5
      LED (RGB)            RED/GREEN/BLUE Triple Color LED                       3
      Rotary Potentiometer Rotary Potentiometer / 10K Ohm                        1
      Humidity & TemperaturDHT11 (Humidity & Temperature Sensor)                 1
      Temperature Sensor   TMP36GT9 (Low Voltage Temperature Sensor)             1
      Photo Resistor       PGM5537D (CDS Photo Resistor)                         1
      Magnetic Buzzer      SM-1205C (Magnetic Buzzer)                            1
      Jumper Wire (M/M)    Various Colors, 26 AWG, 6" (15 cm) Jumper wires      40
      Jumper Wire (M/F)    Various Colors, 26 AWG, 8" (20 cm) Jumper wires      10

Kit parts datasheet

Tutorials

This tutorial helps user experiment mbed examples with on-line compiler.

products/wizwiki_mbed_kit/kit_en.txt · Last modified: 2015/08/21 13:25 by kevinlee