User Tools

Site Tools


products:wizfi360:wizfi360pg:abc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:wizfi360:wizfi360pg:abc [2019/06/13 15:00]
taylor
products:wizfi360:wizfi360pg:abc [2019/06/13 15:16] (current)
taylor
Line 1: Line 1:
-===== Example - Association & Disassociation ​===== +===== Examples ​=====
-=== Station Mode using WPA2 Static IP === +
-\\ +
-This section explains how to connect to AP using WizFi310 with static IP address. +
-In this example, target AP information is as below. +
-( SSID : WizFiDemoAP,​ Security : WPA2, Key : 12345678 )+
  
-<​code>​ +==== 1Assocication & Disassociation ====
-AT   ​ (Sent AT command with 0x0d (Hex of Enter button)) +
-[OK] (Response meaning successful execution)+
  
-AT+WSET=0,​WizFiDemoAP (AT command for setting WiFi association) +  * Station Mode using WPA2 Static IP 
-[OK] +  ​Station Mode using WPA2 DHCP 
- +  ​AP Mode using WPA2 Static IP
-AT+WSEC=0,WPA2,​12345678 (AT command for setting WiFi security) +
-[OK] +
- +
-AT+WNET=0,​192.168.12.101,​255.255.255.0,​192.168.12.1 (AT command for setting ​Static IP address) +
-[OK] +
- +
-AT+WJOIN (AT command executing AP association) +
-Joining : WizFiDemoAP +
-Successfully joined : WizFiDemoAP +
- +
-[Link-Up Event] +
-  ​IP Addr    : 192.168.12.101 +
-  Gateway ​  : 192.168.12.1 +
-[OK] +
- +
-AT+WLEAVE (AT command making disassociation from AP association) +
- +
-[Link-Down Event] +
-[OK] +
-</​code>​ +
-\\ +
- +
-===Station Mode using WPA2 DHCP=== +
-\\ +
-This section explains how to connect WizFi310 to target AP with DCHP Client Mode +
-<​code>​ +
-AT   ​ (Sent AT command with 0x0d (Hex of Enter button)) +
-[OK] (Response meaning successful execution) +
- +
-AT+WSET=0,​WizFiDemoAP (AT command for setting WiFi association) +
-[OK] +
- +
-AT+WSEC=0,​WPA2,​12345678 (AT command for setting WiFi security) +
-[OK] +
- +
-AT+WNET=1 (AT command for setting DHCP) +
-[OK] +
- +
-AT+WJOIN (AT command executing AP association) +
-Joining : WizFiDemoAP +
-Successfully joined : WizFiDemoAP +
- +
-[Link-Up Event] +
-  ​IP Addr    : 192.168.12.13 +
-  Gateway ​  : 192.168.12.1 +
-[OK] +
- +
-AT+WLEAVE (AT command making disassociation from AP association)  +
- +
-[Link-Down Event] +
-[OK] +
-</​code>​ +
-\\ +
- +
- +
-=== AP Mode using WPA2 Static IP === +
-\\ +
-This section explains how to set AP mode using WizFi310. In AP mode, WizFi310  +
-have to set static IP address. (AT+WNET=0,​xxx,​xxx,​xxx) After setting AP mode,  +
-WizFi310 will operate DHCP Server. Thus, when smart phone or other devices  +
-connect to WizFi310, WizFi310 will give IP address to connected device. +
-<​code>​ +
-AT   ​ (Sent AT command with 0x0d (Hex of Enter button)) +
-[OK] (Response meaning successful execution) +
- +
-AT+WSET=1,​WizFi310_AP (AT command for setting WiFi association information) +
-[OK] +
- +
-AT+WSEC=1,​WPA2,​12345678 (AT command for setting WiFi security) +
-[OK] +
- +
-AT+WNET=0,​192.168.12.105,​255.255.255.0,​192.168.12.1 (AT command for setting Static IP address) +
-[OK] +
- +
-AT+WJOIN (AT command executing run AP mode) +
-Joining : WizFi310_AP +
- +
-[Link-Up Event] +
-  IP Addr    : 192.168.12.105 +
-  Gateway ​  : 192.168.12.1 +
-[OK] +
- +
-AT+WLEAVE (AT Command disassociating from AP association)  +
- +
-[Link-Down Event] +
-[OK] +
-</​code>​ +
-\\+
  
 +
 +==== 2) Data Communication ==== 
 +  * Method of setting TCP Client and exchanging data in Data Mode
 +  * Method of setting TCP Server and exchanging data in Data Mode
 +  * Method of setting UDP Client and exchanging data in Data Mode
 +  * Method of setting UDP Server and exchanging data in Data Mode
 +  * Method of setting TCP Client and exchanging data in Command Mode
 +  * Method of setting TCP Server and exchanging data in Command Mode
 +  * Method of setting UDP Client and exchanging data in Command Mode
 +  * Method of setting UDP Server and exchanging data in Command Mode
 +
 +==== 3) SSL Connection ==== 
 +  * WIZnet Cloud
 +  * AZURE Cloud
 +  * AWS Cloud
 +
 +==== 4) Socket Connection with Domain name ==== 
 +==== 5) Auto re-connection ==== 
 +==== 6) Auto re-start ==== 
 +==== 7) Serial to Wi-Fi Setting using Android App ==== 
 +  * https://​play.google.com/​store/​apps/​details?​id=kr.co.wiznet.app_tcp
 +==== 8) MQTT ==== 
 +==== 9) HttpServer ==== 
 +==== 10) HttpClient ==== 
 +==== 11) NTP ==== 
  
products/wizfi360/wizfi360pg/abc.txt · Last modified: 2019/06/13 15:16 by taylor