User Tools

Site Tools


products:wizfi360:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:wizfi360:start [2019/06/12 09:56]
ekkim
products:wizfi360:start [2019/08/29 09:52] (current)
becky
Line 1: Line 1:
 ===== WizFi360 ===== ===== WizFi360 =====
  
-==== Overview ====  +==== Overview ==== 
-WizFi360 ​offers ​quick,+ 
 +WizFi360 ​is low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAPStation and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications. 
 + 
 +<WRAP group> 
 +<WRAP half column>​ 
 +| {{ :​products:​wizfi360:​wizfi360-pa.png ?​direct&​300 | WizFi360-PA(PCB Antena) ​ }}| 
 +^  Figure: **//​WizFi360-PA(PCB Antena)//​** ​ | 
 + 
 +</​WRAP>​ 
 +     
 +<WRAP half column>​ 
 + 
 +| {{ :​products:​wizfi360:​wizfi360-con.png ?​direct&​300 | WizFi360-CON(U.fl Connector Antena) ​ }}| 
 +^  Figure: **//​WizFi360-CON(U.fl Connector Antena)//​** ​ | 
 + 
 +</​WRAP>​ 
 +</​WRAP>​ 
 +<WRAP group> 
 + 
 +| {{ :​products:​wizfi360:​wizfi360-evb.jpg ?​direct&​500 | WizFi360-EVB ​ }}| 
 +^  Figure: **//​WizFi360-EVB//​** ​ | 
 + 
 +</​WRAP>​ 
 +---- 
 + 
 + 
 +==== Feature ===== 
 + 
 +  * WiFi 2.4G, 802.11 b/g/n 
 +  * Support Station / SoftAP / SoftAP+Station operation modes 
 +  * Support “Data pass-through” and “AT command data transfer” mode 
 +  * Support serial AT command configuration 
 +  * Support TCP Server / TCP Client / UDP operating mode 
 +  * Support configuration of operating channel 0 ~ 13 
 +  * Support auto 20MHz / 40MHz bandwidth 
 +  * Support WPA_PSK / WPA2_PSK encryption 
 +  * Serial port baud rate up from 600bps to 2Mbps with 16 common values 
 +  * Support up to 5 TCP / UDP links 
 +  * Obtaining IP address automatically from the DHCP server (Station mode) 
 +  * DHCP service for Wireless LAN clients (AP mode) 
 +  * Support DNS for communication with servers by domain name 
 +  * Support “Keep-Alive” to monitor TCP connection 
 +  * Support “Ping” for monitoring network status 
 +  * Built-in SNTP client for receiving the network time 
 +  * Support built-in unique MAC address and user configurable 
 +  * Support firmware upgrade by UART Download / OTA (via WLAN) 
 +  * Industrial grade (operating temperature range: -40 ° C ~ 85 ° C) 
 +  * CE, FCC certification  
 + 
 +---- 
 +==== Details====  
 +  * [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start|Documents]]  
 +    * [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​datasheet|Datasheet]] : A brief introduce about WizFi360. These documents describe the Features,​package information and etc.  
 +    *  [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​at_instruction_set|AT Instruction set]] : It describes the AT Command of WizFi360 and you can confirm the return message by AT command of WizFi360. 
 +    *  [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​at_command_examples |AT command Example]] : It is include the Basic example using AT command and it is examples of TCP, UDP, SSL use. 
 +    * [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​quick_start_guide |Quick Start Guide]] : The examples using the WizFi360-EVB or WizFi360io,​it describes the scenarios in order from Hardware setting to example of AT command use 
 +    * [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​application_notes|Application Notes]] : The example of Application,​TCP/​UDP ,,etc test using the arduino 
 +    * [[http://​wizwiki.net/​wiki/​doku.php?​id=products:​wizfi360:​wizfi360ds:​start#​at_command_comparison_sheet|AT Command Comparison Sheet]] : The AT command comparsion with esp8266 
 +  * [[https://​github.com/​Wiznet/​Hardware-Files-of-WIZnet/​tree/​master/​07_WizFi_Module/​WizFi360-EVB|Ref schematic]] : Support the schematic of WizFi360-EVB to Gerber,​Partlist,​ Schematic format. 
 + 
 + 
 +For more information visit the [[https://​github.com/​WIZnet-WizFi360/​Release|WizFi360 Github]]. 
 +---- 
 + 
 +===== Q & A ===== 
 + 
 +{{:​products:​w5500:​w5500_evb:​icons:​link.png?​nolink|}} [[https://​forum.wiznet.io/​c/​wifi-module/​wizfi360|WizFi360 Forum]] : WIZnet Forum for Technical support and Project shared 
 + 
 +---- 
products/wizfi360/start.1560300987.txt.gz · Last modified: 2019/06/12 09:56 by ekkim