User Tools

Site Tools


products:wizfi360:board:wizfi360io-h:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:wizfi360:board:wizfi360io-h:start [2019/08/05 10:37]
jeongsk [Overview]
products:wizfi360:board:wizfi360io-h:start [2019/08/05 10:47] (current)
jeongsk [Overview]
Line 5: Line 5:
  
 ==== Overview ==== ==== Overview ====
-This document describes WizFi360io-H. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compactible. WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications.+This document describes WizFi360io-H. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compactible. ​ 
 + 
 +WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications.
  
  
products/wizfi360/board/wizfi360io-h/start.txt · Last modified: 2019/08/05 10:47 by jeongsk