User Tools

Site Tools


products:wiz810sio:start

WIZ810Sio

Overview

WIZ810Sio is the internet offload network module that includes W5100S (TCP/IP hardwired chip, include PHY), MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100S and Transformer. The WIZ810Sio is an ideal option for users who want to develop their Internet enabling systems rapidly.

 WIZ810Sio
Figure: WIZ810Sio

Feature

  • Support Hardwired Internet protocols
    • : TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  • Support 4 independent SOCKETs simultaneously
  • Supports half/full duplex operation
  • Support SOCKET-less command
    • : ARP-Request, PING-Request
  • Support Ethernet Power down mode & Main Clock gating for power save
  • Support Wake on LAN over UDP
  • Supports high speed SPI Interface (SPI mode 0/3)
  • Internal 16Kbytes Memory for TX/ RX Buffers
  • 10BaseT/100BaseTX Ethernet PHY Integrated
  • Support Auto Negotiation (Full and half duplex, 10 and 100-based )
  • Supports Wake On LAN
  • Support Auto-MDIX only when Auto-Negotiation mode
  • 3.3V operation with 5V I/O signal tolerance
  • Interfaces with two 54mm pitch 1 x 6 header pin
  • Very small form factor: 23mm x 25mm (PCB size)

Getting Started

  • Coming soon

Datasheet

Technical Reference

Schematic & Part list & Gerber


Ethernet Library


See Also

WizWiki Forum : WIZnet Forum for Technical support and Project shared


Where to Buy

WIZnet Online Shop
WIZnetUS Online Shop, USA WIZnetEU Online Shop, Germany WIZnetKorea Online Shop, Korea


products/wiz810sio/start.txt · Last modified: 2019/07/09 17:51 by jeongsk