WIZ750SR-110 is a compact sized serial to Ethernet module using the W7500 Ethernet MCU (SoC based on ARM Cortex-M0 architecture) with External PHY(IC+). WIZ750SR-110 is a protocol converter that transmits data sent by serial equipment as TCP/IP data, and converts the TCP/IP data received through the network back into serial data to the serial equipment. It complies with industrial temperature standard.
WIZ750SR-110 is compatible1) with the WIZnet WIZ110SR S2E module. In addition, WIZ750SR-110 contains an 4-pin GPIO expansion port that can be controlled freely by the user. (analog input or digital in/out)
Also, WIZ750SR-110 is compatible to control command with WIZ107SR(WIZ750SR).
WIZ750SR-110 is the best fit solution to control user's serial device via Ethernet network.
Also compatible with WIZ750SR2) is designed to be used. Users can use various kinds of boards if only changing board selection in firmware. (ex WIZ750SR, WIZ750SR-100, WIZ750SR-105, WIZ750SR-110)
|Cable||D-SUB9-FEMALE serial cable||1||Data port|
|24AWG CAT5e UTP cable||1||LAN cable|
* It can be replaced with better components to improve the performance of the product.
Getting Started Guide
WIZ750SR series Common Documents
WIZ750SR series Downloads
WIZ750SR Individual documents
WIZ750SR-100 Individual documents
WIZ750SR-105 Individual documents
WIZ750SR-110 Individual documents