User Tools

Site Tools


products:wiz610mj:start

WIZ610MJ

Overview

WIZ610MJ is the network module that includes W6100 (TCP/IP hardwired chip, include PHY), MAG-JACK (RJ45 with X’FMR) with other glue logics. Please click the link for the further information about W6100. It can be used as a component and no effort is required to interface W6100 and Transformer. The best advantage of the WIZ610MJ is that it supports IPv6. The WIZ610MJ is an ideal option for users who want to develop their Internet enabling systems rapidly.

 WIZ610MJ
Figure: WIZ610MJ

Feature

  • Support Hardwired Internet protocols
    • : TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
  • Support IPv4/IPv6 Dual Stack
  • Support 8 independent SOCKETs simultaneously with 32KB Memory
  • Supports half/full duplex operation
  • Support SOCKET-less command
    • : ARP, PING, ICMPv6(PING, ARP,DAD,NA,RS) Command for IPv6 Auto-configuration& Network Monitoring
  • Support Ethernet Power down mode & Main Clock Switching for power save
  • Support Wake on LAN over UDP
  • Supports high speed SPI Interface (SPI mode 0/3), Parallel System Bus with 2 Address signal & 8bit Data
  • Internal 16Kbytes Memory for TX/ RX Buffers
  • 10BaseT/10BaseTe/100BaseTX Ethernet PHY Integrated
  • Support Auto Negotiation (Full and half duplex, 10 and 100-based )
  • Support Auto-MDIX only when Auto-Negotiation mode
  • Not support IP Fragmentation
  • 3.3V operation with 5V I/O signal tolerance
  • Interfaces with two 2.54mm pitch 1 x 10 header pin
  • Temperature : -40 ~ 85℃(Operation)

Getting Started

  • Coming soon

Datasheet

Technical Reference

Schematic & Part list & Gerber


Ethernet Library


See Also

WizWiki Forum : WIZnet Forum for Technical support and Project shared


Where to Buy

WIZnet Online Shop
WIZnetUS Online Shop, USA WIZnetEU Online Shop, Germany WIZnetKorea Online Shop, Korea


products/wiz610mj/start.txt · Last modified: 2019/07/09 17:50 by jeongsk