User Tools

Site Tools


products:w5100s:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:w5100s:start [2019/04/10 16:31]
ekkim
products:w5100s:start [2019/05/15 15:22] (current)
midnightcow
Line 4: Line 4:
  
  
-The W5100S ​chip designed ​with Hardwared ​TCP/IPWIZnet technology, is an embedded ​Ethernet Controller that enables easier Internet Connection for embedded Systems ​using SPI (Serial Peripheral Interface) ​and Parallel System BUS. W5100S ​suits users in need of stable Internet Connectivity best, using a single chip to implement ​TCP/​IP ​Stack, ​10/100 Ethernet MAC and PHY. + 
-Hardwired ​TCP/​IP ​Stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, etc which has been proven through various ​Applications ​over many years. W5100S ​uses a 16 Kbytes Internal Memory as Data CommunicationWith W5100S, users can implement the Ethernet ​Application they need by using simple SOCKET ​Program ​instead of handling a complex Ethernet ​Controller. It is possible to use 4 Independent Hardware SOCKETs simultaneously+W5100S ​is an embedded Internet controller ​designed ​as a full hardwired ​TCP/​IP ​with WIZnet technology. W5100S provides internet connectivity to your embedded ​system by using SPI (Serial Peripheral Interface) ​or Parallel System BUS. 
-SPI (Serial Peripheral Interface) and Parallel System BUS is provided for easy integration with the external MCU. The W5100S ​SPI supports 70 MHz speed. And also Parallel System Bus supports high speed Network Communication. In order to reduce Power Consumption of the System, W5100S ​provides WOL (Wake on LAN) and a Power Down Mode.+SPI and Parallel System BUS provide easy connection via external MCU to W5100S
 +The clock speed of W5100S SPI supports upto 70MHz and the Parallel System Bus supports higher speed network communication than SPI. 
 + 
 +Since W5100S integrates the Hardwired ​TCP/​IP ​stack with 10/100 Ethernet MAC and PHY, it is truly a one-chip solution for the stable internet connectivity
 +WIZnet’s hardwired ​TCP/​IP ​stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE - and it has been proven through various ​applications ​over the last decade 
 + 
 +W5100S ​provides four independent SOCKETs to be used simultaneously and 16KB internal memory for data communication. 
 +Users can develop an Ethernet ​application easily ​by using the simple ​W5100S ​SOCKET ​program ​instead of handling a complex Ethernet ​controller.  
 +W5100S also provides WOL (Wake on LAN) and a Power Down Mode in order to reduce power consumption. 
 + 
 +W5100S is a low-cost chip that exceeds its predecessor,​ W5100.  
 +Existing firmware using W5100 can be used on W5100S without modification.  
 +W5100S has two types of packages, 48 Pin LQFP & QFN Lead-Free Package. 
  
 {{ :​products:​w5100s:​w5100s_diagram.png?​400 |W5100S Block diagram}} {{ :​products:​w5100s:​w5100s_diagram.png?​400 |W5100S Block diagram}}
products/w5100s/start.1554881478.txt.gz · Last modified: 2019/04/10 16:31 by ekkim