User Tools

Site Tools


Table of Contents



WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications.

 WizFi360-PA(PCB Antena)
Figure: WizFi360-PA(PCB Antena)
 WizFi360-CON(U.fl Connector Antena)
Figure: WizFi360-CON(U.fl Connector Antena)
Figure: WizFi360-EVB


  • WiFi 2.4G, 802.11 b/g/n
  • Support Station / SoftAP / SoftAP+Station operation modes
  • Support “Data pass-through” and “AT command data transfer” mode
  • Support serial AT command configuration
  • Support TCP Server / TCP Client / UDP operating mode
  • Support configuration of operating channel 0 ~ 13
  • Support auto 20MHz / 40MHz bandwidth
  • Support WPA_PSK / WPA2_PSK encryption
  • Serial port baud rate up from 600bps to 2Mbps with 16 common values
  • Support up to 5 TCP / UDP links
  • Obtaining IP address automatically from the DHCP server (Station mode)
  • DHCP service for Wireless LAN clients (AP mode)
  • Support DNS for communication with servers by domain name
  • Support “Keep-Alive” to monitor TCP connection
  • Support “Ping” for monitoring network status
  • Built-in SNTP client for receiving the network time
  • Support built-in unique MAC address and user configurable
  • Support firmware upgrade by UART Download / OTA (via WLAN)
  • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
  • CE, FCC certification 


    • Datasheet : A brief introduce about WizFi360. These documents describe the Features, package information and etc.
    • AT Instruction set: It describes the AT Command of WizFi360 and you can confirm the return message by AT command of WizFi360.
    • AT command Example: It includes the Basic example using AT command and it is examples of TCP, UDP, SSL use.
    • Quick Start Guide: The examples using the WizFi360-EVB or WizFi360io, it describes the scenarios in order from Hardware setting to example of AT command use
    • Firmware Update Guide: The method of using how to upload firmware
    • Application Notes: The example of Application, TCP/UDP, etc test using the Arduino
    • AT Command Comparison Sheet: The AT command comparison with esp8266
  • Ref schematic: Support the schematic of WizFi360-EVB to Gerber, Partlist, Schematic format.

For more information visit the WizFi360 Github.

Q & A

WizFi360 Forum : WIZnet Forum for Technical support and Project shared

products/wizfi360/start.txt · Last modified: 2020/02/10 22:44 by felix