Supported Languages

• English (current page)
  
• Korean

WIZ750SR-110 is a compact sized serial to Ethernet module using the W7500 Ethernet MCU (SoC based on ARM Cortex-M0 architecture) with External PHY(IC+). WIZ750SR-110 is a protocol converter that transmits data sent by serial equipment as TCP/IP data, and converts the TCP/IP data received through the network back into serial data to the serial equipment. It complies with industrial temperature standard.

WIZ750SR-110 is compatible¹⁾ with the WIZnet WIZ110SR S2E module. In addition, WIZ750SR-110 contains an 4-pin GPIO expansion port that can be controlled freely by the user. (analog input or digital in/out)

Also, WIZ750SR-110 is compatible to control command with WIZ107SR(WIZ750SR).

WIZ750SR-110 is the best fit solution to control user's serial device via Ethernet network.

Also compatible with WIZ750SR²⁾ is designed to be used. Users can use various kinds of boards if only changing board selection in firmware. (ex WIZ750SR, WIZ750SR-100, WIZ750SR-105, WIZ750SR-110)

• Serial to Ethernet Module based on W7500 MCU (TTL level)
• Included External PHY chip
• Software and Hardware compatible with WIZ110SR S2E Module
• 10/100Mbps Ethernet & Up to 230kbps serial speed
• Use D-SUB9 port in data line
• 4-Pins Configurable User's I/O
• Status pins: PHY link status / TCP connection status
• Serial signals(TTL or RS-232C)
  • WIZ750SR-110 module(RS-232C): TXD, RXD, RTS, CTS
  • Optional DTR/DSR signals supported (Status pins or DTR/DSR pins selectable)
• Separate Data UART and Debug UART port
• Supports a search password
• Configuration is possible via serial AT commands or via Configuration tool
• Support WIZ VSP (Virtual Serial Port) program
• Built in 10/100Mbps Ethernet ESD Protection IC
• Built in Supervisor IC for improvements of Reset function stability
• PCB Board design 63mm X 45mm (Length x Width)
• Compact sized desig 75mm X 45mm X 18mm (Length x Width x Height)

* It can be replaced with better components to improve the performance of the product.