User Tools

Site Tools


products:w5500:w5500_evb:getting_started

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:w5500:w5500_evb:getting_started [2015/03/16 10:33]
127.0.0.1 external edit
products:w5500:w5500_evb:getting_started [2021/11/24 08:27] (current)
ekkim
Line 1: Line 1:
 ====== Getting Started ====== ====== Getting Started ======
  
-===== Hello World =====+===== Check the board =====
  
 If you've just purchased W5500 EVB, let the following points for the checking board operation at the first time.  If you've just purchased W5500 EVB, let the following points for the checking board operation at the first time. 
Line 10: Line 10:
 The W5500 EVB Need to be LAN cable connected because default demo firmware check the PHY link status periodically. If the LAN cable is not connected, the board does not operate and RGB LED is not blinking. The W5500 EVB Need to be LAN cable connected because default demo firmware check the PHY link status periodically. If the LAN cable is not connected, the board does not operate and RGB LED is not blinking.
 </​WRAP>​ </​WRAP>​
 +
 +----
 +
 +===== Hello World =====
 +This section is descriptive to W5500-EVB operation. let the following points for the board operation.
 +W5500-EVB supported to eclipse loopback example code.
 +Make new W5100S-EVB Project is clicking on this link.
 +If you want to know "How to download the program"​ click on this link.
  
 === 1. RGB LED blinky === === 1. RGB LED blinky ===
products/w5500/w5500_evb/getting_started.txt ยท Last modified: 2021/11/24 08:27 by ekkim