Sidebar
products:w5500:refschematic
Table of Contents
Reference Schematic
External Transformer Type
RJ45 with Transformer Type
RJ45 with integrated Transformer and connected CT
For using connected CT signals inside the Transformer or inside RJ45 the matching network (2x 50R) of the RX+/- signals must be isolated from CT (3.3V). For that isolation we need C23 and C24.
Please refer to the following schematic:
- C23 and C24 must be added. Otherwise, W5500 won't operate well.
- And by connected center tap, Power dissipation may be raised.
- So, you'd better use a MAGJACK without connected center tap except the case that you have to use one with connected center tap.
The RJ45 from UDE (RB1-125BAG1A) is used in many of our W5100 and W7100A related Modules.
Recommended RJ45 using W5500
External Transformer
RJ45 with integrated Transformer
- J1B121ZCCD from CETUS datasheet
- J1B1211CCD from CETUS (used in *1) datasheet
- RB1-1D5B8K1A from UDE datasheet
- RB1-125BAG1A from UDE (used in *2) datasheet
- J0011D21BNL from Pulse datasheet
*1) we use the J1B1211CCD from CETUS in our W5500-EVB, WIZ550io, WIZ550S2E and WIZ550web Modules.
*2) we use the RB1-125BAG1A from UDE in most of our our W5100 & W7100A related Plug-In and Serial-to-Ethernet (S2E) Modules.
products/w5500/refschematic.txt · Last modified: 2015/09/25 10:49 by jeongsk
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
