(C) COPYRIGHT 2015 WIZnet Co.,Ltd.
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, WIZnet SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
This example shows how to use the Dual timer peripheral to run. Only dual timer 0-0 is working in this example.
The Dual timer 0-0 frequency is set to SystemCoreClock(Hz), and the clock is divided by 16. SystemCoreClock is set to 20 MHz.
The dual timer is configured in wrapping mode and periodic mode. The counter size is 32-bit. The interrupt is enabled.
When the Counter reaches 0, the interrupt is occurred and RED LED(PC.08) is toggled every times.
In order to make the program work, you must do the following :