User Tools

Site Tools


products:w5500:application:ipraw

Overview

W5500 IPRAW mode can handle IP layer's upper protocol in the TCP/IP Layer. W5500 IPRAW mode supports transport layer protocol such as ICMP(0x01),IGMP(0x02),TCP (0x06) and UDP(0x11) according to the protocol field of IP header, depending on the protocol number. The 'Ping' of ICMP is already implemented in W5500 as the Hardwired but when the user needs, the host can directly process the ICMP function include ping by opening the Socket n as an IPRAW mode.

Development Environment

  • MCU : STM32F103C8
  • Used program:
    • CoIDE V1.7.4
    • Flash Loader Demonstrator
    • Terminal v1.9b
    • WireShark V1.10.3

Application note & Source code

APPlication note

APPlication Source Code

Version Date Download Etc
1.0.0 2014-02-21 W5500_APC_IPRAW_V100.zip Initial Version
1.1.0 2015-05-10 W5500_APC_IPRAW_V110.zip Modify - Use all socket

Reference Video(Test Result)

2014/02/21 13:09 · ekkim

For more information W5500 chip please also refer to the chip's datasheet:

Datasheet

Datasheet History
Version Date Description
1.0.0 2013-08-01 Initial Release
1.0.1 2013-09-13 Corrected duplicated statements and typing errors (P.14, 23, 24, 28, 39, 51) Corrected descriptions (P.35)
1.0.2 2013-11-14 Changed “descriptions of pin at 1.1 Pin Descriptions” (P.10) starting ”It must be tied to GND to NC (PIN38..42)” / 2. corrected typing error: starting “0x02 to 0x42 value of SOCK_MACRAW at 4.2 Socket Registers(P.50)”
1.0.3 2014-05-29 Corrected “Sn_MSSR at 4.2 Socket Register” (P.53): wrong descriptions of Sn_MSSR about FMTU/MTU
1.0.4 2014-06-13 1. Added Note about reading size register value (P.56, 58) / 2. Added IR Reflow Temperature Profile (P.66)
1.0.5 2014-11-11 1. Added description for MISO pin (P.11):The SCSn signal defines MISO pin output value / 2. Modified the register notation (P.33), Modified the register notation “Sn_IR at 4.2 Socket Register” (P.49) :from [R] to [RCW1] / 3. Corrected typing error: from DICON to DISCON of Sn_SR at 4.2 Socket Register (P.50)
1.0.6 2014-12-30 Corrected typing error : from 0x02 to 0x42 value of SOCK_MACRAW “Sn_CR at 4.2 Socket Registers”(P.46)
1.0.7 2016-02-24 1. Corrected Interrupt Assert Wait Time function (P.34) / 2. Notice PLLclk is 150MHz (P.34)
1.0.8 2017-05-19 1. Corrected Driver Level Range Unit uW/MHz to uW (P.60)

WIZ550io History
Version Date Description
1.0 2013-08-01 Initial Release
1.1 2014-01-17 Changed “External Transformer + RJ-45 to MAGJACK(inside transformer)”
1.2 2015-04-20 Added “Resistor 33R in MDI line. because EMI issue.”
Changed “PCB artwork. because changed develop tool(PADS → Altium) ”

2013/08/30 10:01 · bongbong
products/w5500/application/ipraw.txt · Last modified: 2015/03/16 10:33 (external edit)