User Tools

Site Tools


products:wizfi360:board:wizfi360io:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
products:wizfi360:board:wizfi360io:start [2019/08/05 13:47]
jeongsk [ETC]
products:wizfi360:board:wizfi360io:start [2019/10/24 16:07]
jameskim
Line 6: Line 6:
  
 === WizFi360io-C === === WizFi360io-C ===
-{{:​products:​wizfi360:​board:​wizfi360io-c:​img065.png?200|}}+{{:​products:​wizfi360:​board:​wizfi360io-c:​wizfi360io-c.png?200|}}
  
 WizFi360io-C cable connector type io interface board. The operating voltage of the WizFi360io-C and the UART voltage are 5V. WizFi360io-C can connect the UART interface to the connector. The part name of the connector mounted on WizFi360io-C is "​SMW200-06"​. The cable connector that can be connected to "​SMW200-06"​ is "​SMH200-06"​. WizFi360io-C cable connector type io interface board. The operating voltage of the WizFi360io-C and the UART voltage are 5V. WizFi360io-C can connect the UART interface to the connector. The part name of the connector mounted on WizFi360io-C is "​SMW200-06"​. The cable connector that can be connected to "​SMW200-06"​ is "​SMH200-06"​.
  
 === WizFi360io-H === === WizFi360io-H ===
-{{:​products:​wizfi360:​board:​wizfi360io-h:​img066.png?200|}}+{{:​products:​wizfi360:​board:​wizfi360io-h:​wizfi360-h.png?200|}}
  
 WizFi360io-H is a pin header type io interface board. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compactible. ​ WizFi360io-H is a pin header type io interface board. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compactible. ​
products/wizfi360/board/wizfi360io/start.txt ยท Last modified: 2019/11/06 08:06 by rena