Sidebar
products:wizfi250:wizfi250pg:appendix
Table of Contents
Appendix
WizFi250 UART Throughput Test Report
Test Environment
Test Result
1. Send 10Mbyte data to PC
| Baud rate | Time (Using Command Mode) | Speed(bit/s) | Flow Control |
|---|---|---|---|
| 3686400 | 47s | 1.74M | H/W |
| 1843200 | 1m 20s | 1.00M | H/W |
| 921600 | 2m 20s | 585K | H/W |
2. Send 1Mbyte data to PC
| Baud rate | Data Mode | Command Mode | Flow Control | ||
|---|---|---|---|---|---|
| Time | Speed(bit/s) | Time | Speed(bit/s) | ||
| 3686400 | 24s | 341K | 5s | 1.63M | H/W |
| 1843200 | 25s | 327K | 6s | 1.36M | H/W |
| 921600 | 26s | 315K | 12s | 682K | H/W |
| 115200 | 1m 35s | 86K | 1m 36s | 85K | H/W |
- Command Mode : To sending data, WizFi250 have to use AT+SSEND command.
- Data Mode : Data Mode is the mode which passes data of application layers to peer-device directly, without commands.
- For more information, Refer to Command mode & Data mode.
products/wizfi250/wizfi250pg/appendix.txt · Last modified: 2015/03/16 10:33 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
