User Tools

Site Tools


products:w7500:overview:booting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
products:w7500:overview:booting [2015/04/21 08:34]
hjjeon0608 created
products:w7500:overview:booting [2015/08/18 09:21] (current)
lawrence
Line 2: Line 2:
 # Booting Sequence # Booting Sequence
  
-In the W7500three different boot mode can be selected through the BOOT pin and TEST pin, as shown in the following Table 1.+W7500 has three different boot modes that can be selected through the BOOT pin and TEST pin.
  
 <style type="​text/​css">​ <style type="​text/​css">​
Line 33: Line 33:
     <td class="​tg-031e">​In this mode, W7500 can support ISP function in order to control flash using serial interface.</​td>​     <td class="​tg-031e">​In this mode, W7500 can support ISP function in order to control flash using serial interface.</​td>​
   </tr>   </tr>
-  <​tr>​ +
-    <td class="​tg-s6z2">​1</​td>​ +
-    <td class="​tg-s6z2">​1</​td>​ +
-    <td class="​tg-s6z2">​PP</​td>​ +
-    <td class="​tg-031e"></​td>​ +
-  </tr>+
 </​table>​ </​table>​
  
 When W7500 is reset by hardware, it will be operated as below in embedded boot code. When W7500 is reset by hardware, it will be operated as below in embedded boot code.
  
-![Figure 1 I2C Bus Configuration](http://​wizwiki.net/​wiki/​lib/​exe/​fetch.php?​media=products:​w7500:​operation_boot_code.jpg "​Figure 1 operation of boot code")+![Figure 1 I2C Bus Configuration](http://​wizwiki.net/​wiki/​lib/​exe/​fetch.php?​media=products:​w7500:​documents:​boot.jpg "​Figure 1 operation of boot code")
  
  
 </​markdown>​ </​markdown>​
products/w7500/overview/booting.1429572887.txt.gz · Last modified: 2015/04/21 08:34 by hjjeon0608